TrueData-EIS display views

The device will be operated with 4 keys and a graphical display. The measured impedance values are presented in a table as shown. At the top of the display a state line shows the progress and the actual state of the impedance measurement.




The working points with the DC-values are presented in a separate display. The actual DC mode (current [galvanostat], voltage [potentiostat], power) is shown with the grey set point value to the left part of the display.
 


The results of the frequency sweep (impedance spectrum) is presented as Nyuist diagram or frequency response plot.




The configuration of the device is supported by a clear tree structure of the parameters.



You can find more display views at the TrueData-EIS product description.