Detailed View of a SMART-CVM Single Cell Voltage Measurement

SMART-CVM Single Cell Voltage Monitoring

SMART-CVM for multi-Channel Voltage Monitoring of Fuel Cell Stacks and Batteries
SMART-CVM for multi-Channel Voltage Monitoring of Fuel Cell Stacks and Batteries

The cell voltage monitoring enables the multi-channel voltage monitoring of fuel cell stacks and batteries. Therefore, HORIBA FuelCon uses a CVM from SMART Testsolutions.

Due to to the position near to the test item, the galvanic isolation, digital signal pre-processing, cascading as well as the CAN and TCP/IP interface, allow the SMART-CVM meet all typical test requirements. In addition, it can be used separately as a diagnostic tool for fuel cell systems.

 

TypeSMART Testsolutions
Type: MCM-IntelliProbe-U10
Number of cellscustomized, 2,790 cells possible
Voltage range-1 V to +5 V or -3 V to +3 V
Resolution16 Bit
Accuracy± 0.1 %
Sampling rate<100 ms (up to 1 ms per channel on request)


For further detailed information please refer to product sites of SMART Testsolutions. Or just give us a call! We will be happy to discuss your requirements.